Alliance Gator Block Bond Adhesive XP (28oz)

1. A. Always refer to the latest Gator Block Bond XP Technical Data Sheet (TDS) at AllianceGator.com before installing Gator Block Bond XP.
   B. Make sure that the surfaces you are bonding together are clean.
2. Cut the spout and puncture a hole in the cartridge with a nail.
3. Using a caulking gun, apply Gator Block Bond Adhesive on the clean surfaces. If Gator Block Bond Adhesive is used with GATOR XTURF, apply in a serpentine pattern over GATOR XTURF Seam Tape for XTRA performance and permanent adhesion.
4. Join the two surfaces firmly, use twisting motion. Gator Block Bond Adhesive works at above-freezing temperatures. Material may be repositioned up to 30 minutes without losing bond strength. Moisture will shorten the open time of polyurethane adhesives. Avoid use when raining or onto standing water.

Coverage: Provides approximately 30 linear feet of 1/4” bead with a 10 oz tube and 84 linear feet with a 28 oz tube.

Ideal For:

• Overlays & pool copings
• Steps & wall caps
• Fire pits (up to 400°F (204°C))
• Concrete pavers & bricks
• Dry & damp surfaces
• Permanent bond in 24 hrs
• Retaining Walls
• Stones
• Outdoor porcelain tiles
• Artificial turf